Consulting Hotline0755-2728-6106
Phone number13312911695
Consulting Hotline0755-2728-6106
Phone number13312911695
Your present position：Home > Product > Glue dropping machine
Glue dropping machineCategory：Glue dropping machine
Hotline:0755-2728-6106
| Application: Machine nameplate, stickers labels, Q cards and other signs Dijiao
| Principle of operation：
1, the program editor: in-kind editing, and then Chen can be
2, will have been edited program storage, similar products can be transferred out.
3, irrigation head movement, the pump body (stepper motor drive) for the plastic
4, the movement trajectory: straight line. Curve. Point. Box. Round. W type, S type. Can take any irregular trajectory
5, Z axis up and down movement with ball shaft screw rapid response.
6, glue machine automatic ratio
| Parameters:
|
1 |
Proportion with glue |
3: 1~1:1 adjustable between 1 and any fixed proportion |
|
2 |
Mixing method |
Dynamic mixing |
|
3 |
Machine travel |
680*680*100MM,, itinerary can be customized according to the actual needs of the customer |
|
4 |
Counter tops |
table1050*900,effective working area 680*680mm |
|
5 |
Programming mode |
Teaching programming |
|
6 |
Dimensions |
1220*1050*1500MM |
|
7 |
The main pump (A pump) |
6cc/turn（Taiwan） |
|
8 |
Attached pump (B pump) |
2.4cc/turn（Taiwan） |
|
9 |
Glue power |
Bujin motor |
|
10 |
Tank Capacity |
A Cylinder 25L with thermostat，B Cylinder 10L |
|
11 |
A plastic flow |
2-8g/s |
|
12 |
A plastic head |
Single |
|
13 |
Input pressure |
0.5-0.7Mpa |
|
14 |
Machine power |
1500W |
|
15 |
Supply voltage |
AC220V±10%,50-60HZ |
| Device Configuration:
|
1 |
Control System |
Xinjie PLC + motion control card +7.2 inch Kunlun on-state touch screen |
|
2 |
Software system |
Zhonghu R&D independently, a domestic counterparts developed a software anti-misuse function, anti-fade automatic shutdown function |
|
3 |
Bujin motor |
YAKO Original motor |
|
4 |
Metering pump body |
Taiwan precision adjustment wear type |
|
5 |
Cut off the system |
Zhonghu R&D independently |
|
6 |
Mixing device |
Zhonghu R&D independently |
|
7 |
Thermostat |
Silicone heaters |
|
8 |
Frame material |
A3*3mm manufacture |
|
9 |
Sliding device |
Taiwan HIWIN Slide rails |
|
10 |
Mixing tube cleaning |
Gas and liquid cleaning |
| Features:
|
1 |
Friendly and concise interface |
Foolproof operation program design, simple operation, practical,
ordinary workers can learn all operating methods in 5 minutes |
|
2 |
High-end imported electronic control system |
The main electrical part of the wiring, dust, anti-static, have reached foreign standards |
|
3 |
Glue detection feedback function |
The drum part is equipped with low level alarm function, timely remind the glue to add |
|
4 |
Glue filter four protection |
Filter protection measures to reduce the mechanical pump body failure probability, to prevent impurities in the glue into the glue pipeline |
|
5 |
Large work surface |
Machine points around two, respectively, put two materials, the machine automatically continuous operation, with more efficient |
|
6 |
Equipment running more smoothly |
The overall frame with ultra-thick solid material, an effective solution to the machine when the high-speed movement of body shake, improve production stability and accuracy |
|
7 |
High precision mechanical pump body |
Precision adjustment wear type |
|
8 |
Automatic mechanical agitation |
AB glue mixing using dynamic, mechanical mixing, to ensure that the real sense of AB glue mixture,Completely put an end to dry glue, dry glue uneven phenomenon. |
|
9 |
High precision operation |
The use of double-layer linear slide and high-precision balance block to ensure the accuracy of operations |
| Characteristics of Three-axis Movement:
1, the operation is simple and convenient: touch screen display operation; all Chinese interface, the parameters of the record, display, alarm; for each product to provide the corresponding fixture, the workers training is simple, saving training time and training costs;
2, glue control precision: all key components are imported products, to ensure high speed, precision, while meeting the conditions of automated production under the high reliability requirements.
| Main features of machine：
1, with plastic, plastic irrigation integration, automatic operation, a machine to achieve two functions.
2, the proportion of setting adjustment, plastic volume adjustable. Ready to use at any time, with high precision, on-demand ratio, saving glue.
3, the operation is simple and convenient, the program is simple to edit, easy to disassemble, directly to the A B two kinds of glue were placed in two corresponding barrels, when filling with plastic, workers only need to press the switch can be.
4, according to the performance of the glue, A bucket with a thermostat device, B plastic bucket sealed to prevent volatile, liquid level sensor device, when the glue below this level automatically alarm, add the corresponding glue
5, Easy to clean, automatic cleaning, as long as the set automatic cleaning time is good.
Consulting Hotline0755-2728-6106
Phone number13312911695
Scan, focus on us
